As hobbyists ourselves, we organize local mfg power, panelize designs, reduce the shipping cost, and ensure the quality. It will be a source to sustain our company along with other services we provide.

The minimum PCB quantity we accept for mass production is as low as 10 pieces.When you order PCB through our online system, we will send you a confirmation with an order number.

To make sure orders processed smooth and accurately, mark your order number in silkscreen layer, pack Gerber files into a zip file named A[order number]_[PCB size] (example: A14756_10X10.rar) and then email to [email protected] by including order number in the subject line. Please be sure to avoid boards less than 2cm to reduce cost.

If the file and design meet the Aptinex guidelines, they will be processed and shipped in 1 to 2 weeks based on the order quantity.

Gerber file requirement

The following layers are needed:

  • Top layer: pcbname.GTL
  • Bottom layer: pcbname.GBL
  • Solder Stop Mask top: pcbname.GTS
  • Solder Stop Mask Bottom: pcbname.GBS
  • Silk Top: pcbname.GTO
  • Silk Bottom: pcbname.GBO
  • NC Drill: pcbname.TXT

Note: Board outline must be included at least in one layer. The Gerber file must be RS-274x format.

Design tips

  • Your Gerber file must include only one design
  • Drills line and long slot can’t be accepted
  • Minimum slot 1mm*1mm
  • DRC compatible as rule file attached
  • The PCB size is smallest rectangle that can accommodate PCB
Clarification to penalizing

For the service ‘5cm Max * 5cm Max’, ‘5cm Max * 10cm Max’, ‘10cm Max * 10cm Max’, ‘5cm Max * 15cm Max’, and ‘10cm Max * 15cm Max’, you can penalize to save the cost. However, you are required to cut the boards by yourself or get it done by us for a nominal fee.

The rules of Panelizing
  • There should be no more than 5 sub-boards to fit the size.
  • The sub-boards should only be separated by the silkscreen. Using Any holes or slots to separate the sub-boards are not permitted.

Available Quantity Option

We undertake any order in multiples of 10.

Note: If you want to order more than 10 pcs, please do check the price for different options and find the most economic one.

Aptinex PCB capabilities

  • Multi Layers: 1-2             
  • PCB Material: FR-4
  • Available Color: Green, Red, Yellow, Blue and White. We provide Green free and the rest for an additional cost.
  • Silk Screen: White, Black (For White Solder Mask only)

Available Maximum Size

50mm X 50mm, 50mm X 100mm, 50mm X 150mm, 50mm X 200mm, 100mm X 100mm, 100mm X 150mm, 100mm X 200mm, 150mm X 150mm, 150mm X 200mm, 200mm X 200mm

Note: The PCB maximum dimensions for each price bracket are just that, the maximum.  Your PCB design must be smaller than the dimensions of the service you select.

Available Board Thickness

 0.8mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm

  • Thickness Tolerance: (t=0.8mm) ± 10%
  • Thickness Tolerance: (t<0.8mm) ± 10%
  • Insulation Layer Thickness: 0.075mm–5.00mm
  • Minimum trace width: 6mil (6/1000 inch);
  • Minimum trace/vias/pads space : 6mil (6/1000 inch);
  • Minimum silkscreen width : 4mil (4/1000 inch)
  • Minimum silkscreen text size : 32mil (32/1000 inch)
  • Out Layer Copper Thickness: 1oz (35um)
  • Inner Layer Copper Thickness: 17um—100um
  • Drilling Hole (Mechanical): 0.3mm—6.35mm

 

 

  • Finish Hole (Mechanical): 0.3mm—6.30mm
  • Diameter Tolerance (Mechanical): 0.08mm
  • Registration (Mechanical): 0.09mm
  • Aspect Ratio 8:1
  • Solder Mask Type: Photosensitive ink
  • SMT min Solder Mask Width: 0.1mm
  • Min Solder Mask Clearance: 0.1mm
  • Plug Hole Diameter: 0.25—0.60mm
  • Surface Finish: HASL, HASL (Lead Free) +$5, ENIG+$10.

Available E-TEST Options

50% e-test, 100% e-test

Note: Tested PCB will have a mark on the PCB edge.

Please submit your inquiry to  [email protected] or call us on +94 11 2735220 and we will guide you from there