Aptinex Isolated SPI-CAN Module V1.0 offers you a complete CAN solution that carries the MCP2517FD CAN FD controller from and ISO1042BDWR high-speed CAN transceiver from Texas Instruments.
Features
- Channels: Single
- Isolation: galvanically-isolated
- PCB Size
- CAN Controller : MCP2517FD
- CAN Transceiver: ISO1042BDWR
MC2417FD CAN FD Controller Features
The MCP2517FD is a cost-effective and small-footprint CAN FD Controller that can be easily added to a microcontroller with an available SPI interface. Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN
FD peripheral or that doesn’t have enough CAN FD channels.
The MCP2517FD supports both, CAN frames in the Classical format (CAN2.0B) and CAN Flexible Data Rate (CAN FD) format, as specified in ISO 11898-1:2015.
- Ideal passive, high impedance bus terminals when unpowered
- Conforms to ISO11898-1:2015
- Supports both CAN 2.0B and CAN FD
- Arbitration Bit Rate up to 1 Mbps
- Data Bit Rate up to 8 Mbps
- 31 FIFOs configurable as transmit or receive
- 32 Flexible Filter and Mask Objects
ISO1042BDWR CAN Transceiver Features
The ISO1042 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. TheISO1042 device offers ±70-V DC bus fault protection and ±30-Common-mode voltage range.
- Meets the ISO 11898-2:2016 physical layer standard
- Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps
- Low loop delay: 152 ns
- Protection features
- DC bus fault protection voltage: ±70 V
- HBM ESD tolerance on bus pins: ±16kV
- Driver Dominant Time Out (TXD DTO)
- Driver Dominant Time Out (TXD DTO)
- Common-Mode Voltage Range: ±30 V
- Ideal passive, high impedance bus terminals when unpowered